CONCENTRATED, SINGLE DIP, BLUE-BRIGHT CONVERSION COATING FOR ALL TYPES OF ZINC PLATING. DOES NOT REQUIRE ADDITIONS OF NITRIC ACID. PROVIDES PROTECTION FROM STAINING AND FINGERPRINTS. PRODUCES A DESIRABLE BASE FOR AIR-DRIED AND BAKED LACQUER COATINGS.
BENCHMATE CZ-89
POWDER
CHROMATE USED TO MAKE AN INEXPENSIVE BLUE-BRIGHT CONVERSION COATING ON ZINC PLATE. PROVIDES EXCELLENT CORROSION RESISTANCE. NO NITRIC ACID NEEDED IN CONJUNCTION WITH CZ-89 SOLUTIONS.
BENCHMATE CZ-93
LIQUID
SINGLE DIP TRIVALENT CHROMATE WHICH PROVIDES A CLEAR BLUE-BRIGHT CONVERSION COATING.
Yellow Chromates
Product:
Form:
Description:
BENCHMATE 22
LIQUID
CONCENTRATED YELLOW, IRIDESCENT CHROMATE FOR ZINC PLATING APPLICATIONS. PROVIDES EXCELLENT BASE FOR PAINT, ENAMEL OR LACQUER. DOES NOT CONTAIN NITRIC ACID, CAN BE USED TO CHROMATE ZINC ALLOY DEPOSITS.
BENCHMATE 25
LIQUID
FORMULATED TO PRODUCE A HIGHLY POLISHED IRIDESCENT CHROMATE FILM ON CADMIUM, ZINC PLATED SURFACES, AS WELL AS ZINC DIE CASTINGS. COLOR OF FILM WILL RANGE FROM LIGHT YELLOW TO DARK BROWN DEPENDING ON CONCENTRATION. TYPICAL CORROSION PROTECTION IS 96 - 120 HOURS OF SALT SPRAY PROTECTION TO WHITE CORROSION. CAN BE USED AS A LEACHABLE CHROMATE TO PROVIDE A CLEAR CHROMATE FINISH.
BENCHMATE 45
LIQUID
SINGLE DIP BRONZE CONVERSION COATING FOR ANY TYPE OF ZINC PLATING SOLUTION. CONSISTENT BRONZE COLOR WITH EXCELLENT CORROSION PROTECTION.
Olive Drab Chromates
Product:
Form:
Description:
BENCHMATE 29/29 OD
LIQUID
A TWO COMPONENT CHROMATE TO PRODUCE A CONSISTENT OLIVE DRAB CONVERSION COATING ON ZINC OR CADMIUM PLATED WORK. RESULTING FILM HAS EXCELLENT CORROSION RESISTANT PROPERTIES AND PROVIDES AN EXCELLENT BASE FOR PAINT OR DYING OPERATIONS.
Black Chromates
Product:
Form:
Description:
BENCHMATE 10
LIQUID
TWO PART CONCENTRATE FORMULATED TO PRODUCE A BLACK CHROMATE CONVERSION COATING WITH EITHER A GLOSSY OR MATTE APPEARANCE. CAN BE APPLIED OVER ELECTRODEPOSITED COATINGS OF ZINC, AND ZINC-BASED DIE CASTINGS OR HOT DIP GALVANIZED SURFACES.
Specialty Conversion Coatings
Product:
Form:
Description:
BENCHMATE ZB-70/ZB-71
LIQUID
AN ALLOY CONVERSION COATING FOR ALKALINE AND CYANIDE ZINC DEPOSITS. PRODUCES A DARK GREEN TO BLACK COATING. YIELDS EXTENDED CORROSION PROTECTION. THE ACTUAL CORROSION RESISTANCE ACHIEVED COMPARES WITH THAT OF ZINC ALLOY PLATING.
BENCHMATE 102
LIQUID
HEAVY CHROMATE FILM ON COPPER AND BRASS, EITHER SOLID OR PLATED, WHICH OFFERS MAXIMUM CORROSION PROTECTION AND PROVIDES GOOD ADHESION FOR ORGANIC COATINGS.
BENCHMATE 320 P
POWDER
SELF-CONTAINED, SINGLE DIP CHROMATE FOR ALUMINUM AND ITS ALLOYS. DEPENDING ON CONCENTRATION, WILL PRODUCE A CLEAR TO BROWN FILM. MEETS MIL-C-81706 SPEC.
Pre-Dips
Product:
Form:
Description:
BENCHMATE ZIP
POWDER
A BUFFERED, NON-CHROME CONTAINING PREDIP FOR ZINC AND CADMIUM. PROVIDES A BRIGHT, POLISHED SURFACE IDEAL FOR CHROMATE CONVERSION COATINGS. CONTAINS NO STRONG ACIDS. CAN ALSO BE USED AS A BRIGHT DIP PRIOR TO LACQUER OPERATIONS.
Chromate Seals
Product:
Form:
Description:
BENCHMARK F-104
LIQUID
ADDITIVE USED TO MINIMIZE STAINING OF PLATED METALS AND TO STOP RED RUST OF BARE STEEL DURING THE RINSING AND DRYING OPERATION. DEPOSITS AN INVISIBLE MOLECULAR FILM WHICH FACILITATES RAPID RUN-OFF OF THE RINSE WATER. THIS FILM DOES NOT INTERFERE WITH SUBSEQUENT FINISHING OPERATIONS. OPERATES AT NEUTRAL TO SLIGHTLY ACIDIC pH'S.
BENCHMARK F-108
LIQUID
ADDITIVE USED IN WATER RINSE AFTER CHROMATE TO EXTEND CORROSION PROTECTION OF ZINC PLATED PARTS. CAN PROVIDE OVER 500 HOURS OF SALT SPRAY PROTECTION TO RED RUST WHEN APPLIED OVER 0.0003 TO 0.0005" ZINC PLATED THICKNESS AND CHROMATED SURFACES. ACHIEVE CORROSION PROTECTION COMPARABLE TO ZINC ALLOY PLATING AT THE FRACTION OF THE COST. NO ADDITIONAL EQUIPMENT REQUIRED. CANNOT PAINT OVER F-108 FILM.
