HYDROCARBON OIL-BASED DEFOAMER FOR USE IN AQUEOUS FOAMING SYSTEMS. CAN BE ADDED BY HAND, DRIP BOTTLE, OR METERING PUMP. PERFORMS OVER A WIDE pH RANGE. EFFICIENCY NOT AFFECTED BY AGE.
F-2503
LIQUID
A QUICK-DISPERSING, HIGH EFFICIENCY ADDITIVE USED TO REDUCE FOAM AND SEDIMENT BUILD-UP AND TO HELP ELIMINATE HYDROGEN EXPLOSION. SILICONE BASED. IMMEDIATE FOAM CONTROL AT THE POINT OF ADDITION. EFFECTIVE IN WASTE TREATMENT FOAM CONTROL. CAN BE USED WHERE LITTLE AGITATION IS AVAILABLE.
F-2506
LIQUID
HYDROCARBON, OIL-BASED DEFOAMER FOR CONTROLLING ENTRAINED AIR AND SURFACE FOAM IN AQUEOUS PRODUCTION INVOLVING SURFACTANTS, SOAPS, DETERGENTS, ETC. PERFORMS OVER A WIDE pH RANGE. EFFICIENCY NOT AFFECTED BY AGE.
Corrsion Inhibitors
Product:
Form:
Description:
F-101
LIQUID
NON-FOAMING, WATER SOLUBLE CORROSION INHIBITOR FOR CAST IRON, STEEL AND OTHER FERROUS METALS. RECOMMENDED AS A REPLACEMENT FOR SODIUM NITRITE IN METAL WORKING LUBRICANTS, COOLING TOWERS AND WHERE IRON CORROSION MAY BE A PROBLEM.
F-113
LIQUID
AMINE BASE, WATER SOLUBLE CORROSION INHIBITOR FOR STEEL AND OTHER METALS DURING MANUFACTURING, WHILE CONTRIBUTING LUBRICITY AND GENERAL METAL-WORKING PROPERTIES. DOES NOT CONTAIN STRONG ACIDS, ALKALIES OR THEIR SALTS. DOES NOT CONTAIN CHROMATES, NITRITES, BORON, CYANIDES, POISONOUS METALS. FILM PRODUCED IS INVISIBLE AND NOT TACKY OR OILY.
F-116
LIQUID
ADDITIVE USED TO MINIMIZE STAINING OF PLATED METALS AND TO STOP RED CORROSION OF BARE STEEL, CAST IRON, AND OTHER FERROUS METALS DURING RINSING AND DRYING OPERATIONS. FILM DOES NOT INTERFERE WITH SUBSEQUENT FINISHING OPERATIONS. CAN ALSO BE USED ON PHOSPHATED STEEL ELIMINATING THE NEED FOR HEX OR TRI CHROME FINAL RINSE.
F-1130 M
LIQUID
CLEAR, BLUE LIQUID USED TO PROVIDE IN-PLANT CORROSION PROTECTION. CONTAINS NO OILS AND WILL NOT SUPPORT BACTERIA BY ITSELF UNLESS IT PICKS UP OILS FROM THE METALS. THE BLUE SOLUTION CAN EASILY BE MAINTAINED COLORIMETRICALLY. DOES CONTAIN NITRITES.
ZPO-166
LIQUID
MULTI-PURPOSE WATER DISPLACING CORROSION INHIBITOR. WILL SEPARATE WATER DISPLACED FROM METAL SURFACES AFTER MACHINING OPERATIONS OR PICKLING AND ALKALI CLEANING. BOTTOM OF TANK SHOULD HAVE A DRAIN TO REMOVE WATER SEPARATED TO THE BOTTOM. ALSO ACTS AS A LUBRICANT.
ZPO-169
LIQUID
MULTI-PURPOSE CORROSION INHIBITOR AND LUBRICATING FINISH FOR METAL SURFACES. EMULSIFIES IN HOT OR COLD WATER.
Metal Strippers
Product:
Form:
Description:
B-9 NICKEL STRIPPER
LIQUID
ONE COMPONENT NICKEL STRIPPER OFFERING EASE OF OPERATION, ABSENCE OF FUMES AND UNPLEASANT ODORS, ELIMINATING OPERATING HAZARDS, AND SIMPLIFIED WASTE DISPOSAL OF THE SPENT BATH. SHOULD STRIP 1 - 2 MILS PER HOUR AND SHOULD DISSOLVE 2.5 - 6 OZ. OF NICKEL PER GALLON OF SOLUTION. STRIP RATE OF EN DEPENDS ON THE PHOSPHOROUS CONTENT OF THE DEPOSIT. PHOSPHOROUS CONTENT NOT EXCEEDING 11% SHOULD DISSOLVE AT THE SAME APPROX. RATE AS ELECTROLYTIC NICKEL PLATE.
B-9+ NICKEL STRIPPER
POWDER
ONE COMPONENT NICKEL-IRON STRIPPER OFFERING EASE OF OPERATION, ABSENCE OF FUMES AND UNPLEASANT ODORS, ELIMINATING OPERATING HAZARDS, AND SIMPLIFIED WASTE DISPOSAL OF THE SPENT BATH. HAS PROVEN EFFECTIVE UP TO 40% IRON IN NICKEL DEPOSIT. SHOULD STRIP 1 - 2 MILS PER HOUR AND SHOULD DISSOLVE 2.5 - 6 OZ. OF NICKEL PER GALLON OF SOLUTION.
B-929 NICKEL STRIPPER
POWDER
ONE COMPONENT NICKEL STRIPPER OFFERING EASE OF OPERATION, ABSENCE OF FUMES AND UNPLEASANT ODORS, ELIMINATING OPERATING HAZARDS, AND SIMPLIFIED WASTE DISPOSAL OF THE SPENT BATH. USED FOR REMOVING NICKEL FROM BRASS, COPPER, ZINC DIECAST, SILVER AND GOLD.
ENS-100
POWDER
EFFECTIVE AND ECONOMICAL ELECTROLYTIC STRIPPER USED WITH H2O2 FOR THE REMOVAL OF COPPER, NICKEL, CHROME, ZINC, SILVER OR BRASS FROM FERROUS-BASED PARTS AND STAINLESS STEEL RACK TIPS.
ENS-103
LIQUID
ELECTROLYTIC STRIPPER FOR REMOVING BRIGHT AND SEMI-BRIGHT NICKEL, COPPER, ZINC, CHROME, SILVER, TIN AND BRASS FROM STAINLESS STEEL RACK TIPS.
F-1666
POWDER
ACCELERATOR USED WITH CAUSTIC SODA TO STRIP ZINC PLATING FROM STEEL. CAN BE USED WITH OR WITHOUT CURRENT. CURRENT WILL INCREASE THE EFFICIENCY AND DECREASE THE COST OF STRIPPING ZINC.
MS-63/MS-64
LIQUID
A TWO PART NON-CYANIDE IMMERSION COPPER STRIPPER FOR REMOVING ELECTROPLATED COPPER FROM STEEL SUBSTRATES. THE PROCESS STRIPS AT A RATE OF 4 - 6 MILS OF COPPER PER HOUR FOR A FRESH SOLUTION.
MS-65/MS-66
POWDER / LIQUID
A NON-CYANIDE, ALKALINE STRIPPER THAT DISSOLVES LOW TO MEDIUM PHOSPHOROUS EN DEPOSITS FROM STEEL, COPPER AND COPPER ALLOY SUBSTRATES.
